no nozzles, 2 x 40mm hole
no spreader
no ball cage
Churn lid

2 x 40mm + 2 x 50mm nozzles
spreader
ball cage
Sanitary trap lid

1 x 40mm + 1 x 50mm nozzles
spreader
no ball cage
Receiver lid

3 x 40mm + set of probes
spreader
no ball cage
Receiver lid

2 x 40mm nozzles
spreader
no ball cage
Receiver lid

4 x 40mm nozzles
spreader
no ball cage
Receiver lid

3 x 40mm nozzles
spreader
no ball cage
Receiver lid

Stainless steel jar lids

2 x 38mm nozzles
spreader
no ball cage
Receiver lid

2 x 50mm nozzles
spreader
no ball cage
Receiver lid

3 x 40mm nozzles
spreader
no ball cage
Receiver lid

2 x 40mm + 1 x 50mm nozzles
spreader
no ball cage
Receiver lid

2 x 76mm + 1 x 50mm nozzles
spreader
no ball cage
Receiver lid

3 x 38mm nozzles
spreader
no ball cage
Receiver lid

3 x 50mm nozzles
spreader
no ball cage
Receiver lid

2 x 76mm nozzles
spreader
ball cage
Sanitary trap lid

2 x 76mm nozzles
spreader
no ball cage
Receiver lid

3 x 50mm + 1 x 76mm nozzles
spreader
ball cage
Sanitary trap lid

Milk probes, ball float switches and mercury switched for liquid level controls

Constructed from stainless steel, this float assembly uses three internal reed switches to control the operation of the milk pump when the liquid level raises and lowers the ball float. Suitable for fixing into stainless steel jar lids for jar receivers.

Constructed from stainless steel, this float assembly uses three internal reed switches to control the operation of the milk pump when the liquid level raises and lowers the ball float. Suitable for fixing into rubber jar lids for jar receivers.

Constructed from stainless steel, this float assembly uses three internal reed switches to control the operation of the milk pump when the liquid level raises and lowers the ball float. Suitable for fixing into receiver vessels.

Probe assembly for fitting into a 40mm diameter hole in a receiver top cover. The longest probe is 630mm long.

Mercury switch used in old type Alfa Laval liquid level controls and Fullwood / Gascoigne Melotte tipping / tilting liquid level controls, also used in many Stuart Turner liquid level controls.

Liquid level controls for milk pumps / pre cooler delays

Works with two or three probe systems, and even float switches. Fitted with a thermal overload to protect the unit, and fitted with a heavy duty contactor wired for single phase, but easily adapted to three phase operation. Well made and very reliable in service.

As ATLLL1 but with the addition of a built in, fully adjustable time delay module. Simple rotary controls adjust the milk pump running time [5 - 95 secs] and pre cooler time delay [0.5 - 35 secs]. Fitted with a manual continuous run switch.

The pre cooler delay unit keeps cold water flowing through your plate cooler just long enough to chill residual milk. Simple and easy to adjust from 0.5 to 35 seconds. Easy installation, works in conjunction with existing liquid level control.

Constructed in an IP rated splash proof enclosure and fitted with a two position switch for automatic or manual operation. Fitted with a 6a thermal overload, this is suitable for all but the biggest of milk pumps. Operated from stainless steel probes or magnetic float sensor.

All the benefits and performance of the LL1 with the addition of a built in pre cooler delay.

This box provides for the automatic / manual operation of a mains powered centrifugal milk pump via a probe assembly. Has built in delay for pre cooler solenoid valve. 230v 50 hz 0.55-0.75kw.

Kingston milk pump liquid level control

This is a heavy duty version of MP307, using a contactor instead of a relay. This box has a separate connection for a water control solenoid. 230v 50hz 0.55-0.75kw.

This is a heavy duty version of MP307, using a contactor instead of a relay. This box has a separate connection for a water control solenoid. 230v 50hz 1.1kw.

This is the Kingston TDM plate cooler time delay module. Easily adjusted, Easy installation, works in conjunction with existing liquid level control.

Three way valves

40mm 3 way milk wash valve. Suitable for replacing DeLaval three way valves.

50mm 3 way milk wash valve. Suitable for larger milk and wash lines