milking machine spares and spare parts for milking machines - Brewery heating elements  


milkingmachines.co.uk

milkingmachines.co.uk
Unit C5, Palmers Brook Farm
Park Road
Wootton Bridge, Ryde,
Isle of Wight
PO33 4NS
United Kingdom
sales@milkingmachines.co.uk

About Us | Carriage | Catalogue | Contact Us | Enquiries | PCI Compliance | Privacy | Security | Terms

Brewery elements / immersion heaters Feedback from brewers was that the spacer used to separate the elements was getting in the way whilst cleaning out the mash tun, we therefore removed this from our standard elements to aid in the cleaning process, we also changed the manufacturing process to allow for a degree of bending to occur on the elements in order to further alleviate the problem. We also discovered that a number of brewers use external temperature reading equipment in order to control the process, therefore the thermostat pockets in our standard range where surplus to requirements and once again got in the way when cleaning, the design therefore was changed and the thermostat pockets were removed, this meant the arrival of our fully specific brewery specification heaters.
Product Code Description Price Buy
  • IP55 thermoplastic enclosure with gland entry point

  • Fibreglass gasket included

  • Brass plug with Incoloy 825 sheathed elements - prolonged life compared to Incoloy 800

  • Low watts densities - helps reduce caramelisation of the sugars in the product & improve corrosion resistance in aggressive environments

  • No thermostat pockets or element spacer

  • Manufactured to BS7798

  • All electrical wiring must be carried out by a competent person and must comply with the current IEE wiring regulations to BS7671.

  • Individually pressure tested before leaving the factory

We also offer a wide range of thermostats, elements, accessories and spanners which can be found here.


Brewery heating /  immersion heater element 6/385/BS 6.0 kW 15" inch (385mm) element [2.25" bsp]

6.0kW 240v / 400v three phase and neutral
Length 15 inches
2.25" bsp fitment
Not fitted with thermostat pockets

Watts density 11.1 w/cm2

127.00


Brewery heating /  immersion heater element 9/585/BS 9.0 kW 23 inch (585mm) element [2.25" bsp]

9.0kW 400v three phase and neutral
Length 23 inches
2.25" bsp fitment
Not fitted with thermostat pockets

Watts density 10.3 w/cm2

136.00


Brewery heating /  immersion heater element 12/585/BS 12.0 kW 23 inch (585mm) element [2.25" bsp]

12.0kw 400v three phase and neutral
Length 23 inches
2.25" bsp fitment
Not fitted with thermostat pockets

Watts density 13.7 w/cm2

144.00


Brewery heating /  immersion heater element 15/665/S 15.0 kW 26 inch (665mm) element [2.25" bsp]

15.0kw 400v three phase and neutral
Length 26 inches
2.25" bsp fitment
Not fitted with thermostat pockets

Watts density 15.1 w/cm2

153.00


Brewery heating /  immersion heater element 18/665/S 18.0 kW 26 inch (665mm) element [2.25" bsp]

18.0kw 400v three phase and neutral
Length 26 inches
2.25" bsp fitment
Not fitted with thermostat pockets

Watts density 18.2 w/cm2

161.00


  • We source only the best available elements, but even these cannot be guaranteed against failure due to heavy limescale deposits or overheating due to product build up.

  • To maintain their limited 6 month warranty, end users must take responsibility for their water quality, and if necessary install adequate water softening devices where necessary.

  • Failures caused by running dry, overheating or scale build up will not be entertained.

Disclaimer: The original equipment manufacturers names and numbers are for reference purposes only, and are used only to identify suitable alternatives. Unless specifically stated, we are not inferring our products are identical to the original equipment, or made by the original equipment manufacturer.

Isle of Wight weather conditions.
milkingmachines.co.uk Copyright 1999 - 2020. Web design and SEO by Shaun Wheeler. This site was last updated 08/02/2020, and features in isleofwightweather.co.uk. loheat.co.uk sell dairy equipment and  water heaters. milk-bar and calf-feeding.co.uk sell calf feeders. Part of the dc engineering specialist dairy engineers and milking machine installers collection of milking machine and dairy equipment websites, helping provide you with usable milking solutions


The milkingmachines.co.uk shopping cart is hosted by Mal's e-commerce.  Member of BAGMA   Member of the Isle of Wight Chamber of Commerce  Trading standards approved  PCI DSS Compliant